IMSA Prototype Challenge DecalISDC-2003
- 19-IMSA Prototype Challenge Decal
- 5" X 2.46"
APPLICATION FOR DOUBLE MASKED DECAL
There is a masking layer on top of the vinyl graphic which protects it from external factors and another masking layer on the back to protect the adhesive used for sticking the graphic on the surface.
1 - Clean and dry the application surface to avoid bubbles or wrinkles remaining on the decal. You may wet the area with soap and water, if desired.
2 - Remove the back layer of the clear mask.
3 - Once the graphic is flat on to the surface you can use a squeegee to adhere the sticker. Apply even pressure from center to sides.
4 - Once you are satisfied, remove the top layer masking paper.